跳转到主内容

Smartab STJR700 Home Button Replacement

你所需要的

  1. Smartab STJR700 Home Button Replacement, Home Button: 步骤 1 中的图像 1,2 Smartab STJR700 Home Button Replacement, Home Button: 步骤 1 中的图像 2,2
    • Power off device. Place it face down. Unscrew the four perimeter screws using a PH000.

  2. Smartab STJR700 Home Button Replacement: 步骤 2 中的图像 1,1
    • Using a plastic opening tool or metal spudger, begin to gently pry the rear case down and away from the display. Slowly wiggle the tool up and down to pry open the tablet. Once the rear case is fully removed, place it to the side.

  3. Smartab STJR700 Home Button Replacement: 步骤 3 中的图像 1,3 Smartab STJR700 Home Button Replacement: 步骤 3 中的图像 2,3 Smartab STJR700 Home Button Replacement: 步骤 3 中的图像 3,3
    • Using tweezers, carefully remove the tape that is holding the black and red intertwined cables to the motherboard. Place tape to the side as it will be needed for reassembly.

  4. Smartab STJR700 Home Button Replacement: 步骤 4 中的图像 1,1
    • Remove the two Phillips #000 screws holding the home button board to the front panel.

  5. Smartab STJR700 Home Button Replacement: 步骤 5 中的图像 1,2 Smartab STJR700 Home Button Replacement: 步骤 5 中的图像 2,2
    • Using tweezers, slowly and carefully remove the end of the cable that connects the home button to the main motherboard.

结论

To ensure a successful replacement make sure to follow all steps carefully .

Moriah Wiggins

于03/08/17注册

201 声望

创作了2篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 1

总计 298