跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Before opening the LCR-Reader, place a small bit of tape over the button on the top housing. This will keep the button from falling loose and being lost.

  1. Start by removing the 4 screws in the back of the device using a size 00 Philips screw driver. Start by removing the 4 screws in the back of the device using a size 00 Philips screw driver.
    • Start by removing the 4 screws in the back of the device using a size 00 Philips screw driver.

  2. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  3. Gently open the zif connector that holds the screen. Insert the replacement screen, and close the zif
    • Gently open the zif connector that holds the screen.

    • Insert the replacement screen, and close the zif

  4. When closing the housing, make sure the screen fits into the rectangle on the top.
    • When closing the housing, make sure the screen fits into the rectangle on the top.

    • If the screen is not in this rectangle, it may become damaged when the screws are tightened

    • Hold the screen in place from below; line up the button's edge of the top housing to line up with the bottom housing. Slide your finger out as you bring the top and bottom housings to meet.

    • Replace the 4 Philips screws in the back.

终点

另外一个人完成了本指南。

brittany

于2012年07月16日注册

234 信誉积分

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 4

总计 291