修复你的物品 维修的权力 商店

Smart Parts Ion Separate Body From Grip Frame

撰写者： Shane Villalpando (和另外5个贡献者)
  • 评论： 0
  • 收藏 0

难度

简单

步骤

4

所需时间

5 - 10 分钟

节

1

标志

1

Prerequisite Only

仅作为前提条件

请注意，本指南只是其他指南的前提条件。

工具

配件

没有特定配件。

  1. Remove the front and rear 1" screws on the gun's grip frame using a 3/32" Allen Wrench. Remove the front and rear 1" screws on the gun's grip frame using a 3/32" Allen Wrench. Remove the front and rear 1" screws on the gun's grip frame using a 3/32" Allen Wrench.

    • Remove the front and rear 1" screws on the gun's grip frame using a 3/32" Allen Wrench.

    编辑

  2. Remove the 12 mm screw on the top of the grip frame using a 3/32" Allen wrench. Remove the 12 mm screw on the top of the grip frame using a 3/32" Allen wrench.

    • Remove the 12 mm screw on the top of the grip frame using a 3/32" Allen wrench.

    编辑

  4. Separate the gun's body from the frame by gently pulling them in opposite directions.

    • Separate the gun's body from the frame by gently pulling them in opposite directions.

    编辑

  5. Remove the 1-1/4" screw that's attached to the blue tube above the front grip using a 3/32" Allen Wrench.

    • Remove the 1-1/4" screw that's attached to the blue tube above the front grip using a 3/32" Allen Wrench.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Shane Villalpando

于2015年02月02日注册

1,022 信誉积分

创作了10篇指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team 8-42, Amido Winter 2015 Cal Poly, Team 8-42, Amido Winter 2015 的会员

CPSU-AMIDO-W15S8G42

4 名成员

创作了10篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 0

过去的7天： 0

过去的30天： 0

总计 39