跳转到主内容
  1. Turn the gun on by pressing the power button until the red light blinks.
    • Turn the gun on by pressing the power button until the red light blinks.

    • Turn vision mode off by pressing the power button again.

    • Red light should be flashing in a double blink sequence.

  2. Pull the trigger to release the air in the gun.
    • Pull the trigger to release the air in the gun.

    • Pressurized air can be forceful, causing particles to be ejected from the gun into your eyes and/or skin. When air bubbles enter the bloodstream, they can block blood vessels, causing embolisms. To avoid this, make sure to point the gun in a safe direction when pulling the trigger because air will be released from the gun.

结论

To reassemble your device, follow these instructions in reverse order.

Shane Villalpando

于2015年02月02日注册

1,022 信誉积分

创作了10篇指南

团队

Cal Poly, Team 8-42, Amido Winter 2015 Cal Poly, Team 8-42, Amido Winter 2015 的会员

CPSU-AMIDO-W15S8G42

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 38