跳转到主内容

简介

This guide will show how to take apart and repair the small engine recoil starter on a lawn mower.

配件

没有特定配件。

  1. To begin the repair remove the protective casing. (This removal may vary with different lawnmowers.)
    • To begin the repair remove the protective casing. (This removal may vary with different lawnmowers.)

  2. Locate the recoil housing cap.
    • Locate the recoil housing cap.

  3. Carefully remove the housing cap. (Removal may vary)
    • Carefully remove the housing cap. (Removal may vary)

  4. iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物

    iPhone X Fix Kits

    Warranty up? No worries, we’ve got the fix.

    现在开始购物
  5. After removing the recoil, unscrew the cap that holds the pulley to the recoil starter housing.
    • After removing the recoil, unscrew the cap that holds the pulley to the recoil starter housing.

  6. Untie the knot in the rope and slide it out of the housing.
    • Untie the knot in the rope and slide it out of the housing.

  7. With this particular model there is a middle lock piece. Use a socket wrench to unscrew and release the coil.
    • With this particular model there is a middle lock piece. Use a socket wrench to unscrew and release the coil.

  8. Once unscrewed, remove the metal piece which releases the tension on the coil.
    • Once unscrewed, remove the metal piece which releases the tension on the coil.

  9. At this point add the new coil to the housing base. Snap the coil into position where the old on was.
    • At this point add the new coil to the housing base. Snap the coil into position where the old on was.

结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

James Marmaud

于2017年03月20日注册

255 信誉积分

撰写一个指南

团队

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 16

过去的30天: 63

总计 1,006