跳转到主内容

简介

The purpose of this guide is to show the steps necessary to replace the faulty DC power connector.

  1. Slingbox SOLO DC Power Connector Replacement, Motherboard: 步骤 1 中的图像 1,1
    • Use the plastic opening tool to remove the four rubber pads from the bottom of the device.

  2. Slingbox SOLO DC Power Connector Replacement: 步骤 2 中的图像 1,3 Slingbox SOLO DC Power Connector Replacement: 步骤 2 中的图像 2,3 Slingbox SOLO DC Power Connector Replacement: 步骤 2 中的图像 3,3
    • The Slingbox has four black 5mm screws, one on each corner of the case.

    • Remove the four black 5mm screws using the PH1 screwdriver.

    • Gently pull and separate the two case covers.

  3. Slingbox SOLO DC Power Connector Replacement: 步骤 3 中的图像 1,3 Slingbox SOLO DC Power Connector Replacement: 步骤 3 中的图像 2,3 Slingbox SOLO DC Power Connector Replacement: 步骤 3 中的图像 3,3
    • The motherboard has five silver 5.5mm screws connecting it to the base of the Slingbox.

    • Remove the five silver screws on the motherboard using the PH1 screwdriver.

    • Gently slide and separate the motherboard from the base.

  4. Slingbox SOLO DC Power Connector Replacement, DC Power Connector: 步骤 4 中的图像 1,1
    • Do not touch the heated tip of the soldering iron.

    • Check this guide out to learn how to use a soldering iron.

    • Desolder all three lead prongs.

    • Gently pull the DC power connector from the motherboard.

结论

To reassemble your device, follow the instructions in reverse order.

Nitin Muralidhar

于2016年07月18日注册

222 声望

创作了2篇指南

团队

IUPUI, Team 2-2, Harley SU 2016 IUPUI, Team 2-2, Harley SU 2016 的会员

IUPUI-HARLEY-SU16S2G2

5 名成员

创作了2篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 0

过去 30 天: 12

总计 247