跳转到主内容

SkullCandy Hesh Size Adjuster Replacement

你所需要的

  1. SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 步骤 1 中的图像 1,2 SkullCandy Hesh Size Adjuster Replacement, Determine the damage: 步骤 1 中的图像 2,2
    • Locate the break in the device.

  2. SkullCandy Hesh Size Adjuster Replacement: 步骤 2 中的图像 1,1
    • Use a Phillips #0 screwdriver to remove the two 9 mm screws from the bottom inner casing beneath the break.

  3. SkullCandy Hesh Size Adjuster Replacement: 步骤 3 中的图像 1,1
    • Remove the bottom inner casing to reveal the wire compartment and the port where the slider inserts.

  4. SkullCandy Hesh Size Adjuster Replacement: 步骤 4 中的图像 1,2 SkullCandy Hesh Size Adjuster Replacement: 步骤 4 中的图像 2,2
    • Cover the detached slider port in a generous layer of Plasti Dip, which works like glue. Also coat any exposed wire to seal the circuit.

  5. SkullCandy Hesh Size Adjuster Replacement: 步骤 5 中的图像 1,1
    • Realign the broken size adjuster into the port with the Plasti Dip so that it can be secured to the ear piece.

  6. SkullCandy Hesh Size Adjuster Replacement: 步骤 6 中的图像 1,1
    • Clamp the pieces in place by hand or with a binder clip until the Plasti Dip dries. Feel free to use a hair dryer on a low setting to speed up the process.

结论

To reassemble your device, reattach the bottom inner casing with the Phillips #0 screwdriver and two removed screws.

Sarah Burk

于01/15/15注册

247 声望

创作了3篇指南

团队

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 3

过去 30 天: 18

总计 807