跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

Is your motor running but the drill is not turning? Replace those gears to start providing torque to your drill bit.

配件

没有特定配件。

  1. On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.
    • On the front of the drill, remove the three 2" flathead screws connecting the front housing to the rear housing.

  2. Manta 螺丝刀工具包

    日常维修的112个替换头

    Upgrade Your Toolbox

    Manta 螺丝刀工具包

    Upgrade Your Toolbox
  3. Pull the front housing apart from the rear. The motor and gears might fall out when you are pulling it apart.
    • Pull the front housing apart from the rear.

    • The motor and gears might fall out when you are pulling it apart.

  4. Remove gear from the divider and add the new gear. Remove gear from the divider and add the new gear.
    • Remove gear from the divider and add the new gear.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Matt

于2010年10月10日注册

365 信誉积分

创作了7篇指南

团队

Cal Poly, Team 5-17, Maness Fall 2010 Cal Poly, Team 5-17, Maness Fall 2010 的会员

CPSU-MANESS-F10S5G17

3 名成员

创作了7篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,876