跳转到主内容

简介

The faceplate connects all of the internal wiring of the microphone. If it is defective (or wires need to be reattached to it), this guide shows how to replace it.

配件

没有特定配件。

  1. Remove the yellow and green wires from the face plate.
    • Remove the yellow and green wires from the face plate.

    • Note which side the yellow and green wires connect to.

  2. PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物

    PC 笔记本电池

    An easy fix for a big power boost.

    现在开始购物
  3. Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable. Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.
    • Never open the microphone capsule. Attempting to open the capsule will likely result in permanent damage and make the microphone unusable.

    • Using an adjustable crescent wrench, remove the nut and washer from the face plate by twisting the nut counterclockwise.

  4. Slide the face plate over the connector. Slide the face plate over the connector.
    • Slide the face plate over the connector.

结论

Follow the steps of the guide in reverse to reassemble the microphone. In order to solder wires back to faceplate use soldering guide.

nat coll

于2012年09月27日注册

411 信誉积分

创作了14篇指南

团队

Cal Poly, Team 7-53, Forte Fall 2012 Cal Poly, Team 7-53, Forte Fall 2012 的会员

CPSU-FORTE-F12S7G53

5 名成员

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 3

过去的7天: 17

过去的30天: 62

总计 6,565