简介

The collar is the place the top and bottom of the microphone screw together. After unscrewing it, you will have access to most of the internal parts of the microphone.

Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it. Be careful to not pull on the collar or you may rip the wires from the faceplate. Be careful to not pull on the collar or you may rip the wires from the faceplate.
  • Grab the microphone base with one hand. With the other hand, grab just below the grille (the collar). Twist the collar clockwise to loosen it.

  • Be careful to not pull on the collar or you may rip the wires from the faceplate.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

nat coll

于2012年09月27日注册

366 信誉积分

创作了17篇指南

团队

Cal Poly, Team 7-53, Forte Fall 2012 Cal Poly, Team 7-53, Forte Fall 2012 的会员

CPSU-FORTE-F12S7G53

5 名成员

创作了18篇指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 22

过去的30天: 102

总计 7,198