修复你的物品

维修的权力

商店

Sharp Aquos LC13B2UA Speakers Replacement

撰写者： Robert Hobson (和另外6个贡献者)
  • 评论： 0
  • 收藏 6

难度

中等

步骤

8

所需时间

10 - 20 分钟

节

3

标志

1

Better Introduction

更好的介绍

通过完成或修改其开头介绍以改善本指南。

简介

This guide will help you disassemble your Sharp Aquos LC13B2UA and replace the speakers. If your speakers are no longer working, then this guide can show you how to replace them.


工具

购买这些工具

配件

没有特定配件。

  1. Place the TV face down on a flat smooth surface as to not scratch the screen. Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

    翻译

  2. Lift the stand off the television. Lift the stand off the television.

    • Lift the stand off the television.

    翻译

  3. Remove the two back panels by prying them out with your hands. Remove the two back panels by prying them out with your hands. Remove the two back panels by prying them out with your hands.

    • Remove the two back panels by prying them out with your hands.

    翻译

  4. 跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

    跳过升级

    通过使用多合一工具包维修可以节省成本。

    购买 iPhone 维修工具套装

  5. Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge. Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

    翻译

  6. Using your hands, gently lift and remove the back case of the television.

    • Using your hands, gently lift and remove the back case of the television.

    翻译

  7. Remove the eight 9mm screws from both speakers. Do not remove the speakers yet—they are still attached.

    • Remove the eight 9mm screws from both speakers.

    • Do not remove the speakers yet—they are still attached.

    翻译

  8. Remove the two speaker cables from the circuit board by pinching the plastic connectors and firmly pulling up. Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

    • Remove the two speaker cables from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

    • Do not remove the speakers yet—they are still attached.

    翻译

  9. Remove the two black tape strips (one on each side) securing the power cable to the frame. The speakers can now be removed.

    • Remove the two black tape strips (one on each side) securing the power cable to the frame.

    • The speakers can now be removed.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与6其他贡献者

Robert Hobson

于2011年01月20日注册

1,275 信誉积分

创作了9篇指南

徽章: 12

+ 9更多徽章

团队

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011 的会员

CPSU-AMIDO-W11S1G11

4 名成员

创作了9篇指南

0条评论

添加一条评论

添加评论

浏览统计数据:

过去的24小时： 1

过去的7天： 5

过去的30天： 21

总计 4,286