跳转到主内容

本指南有最近更改,您可查看未经巡查的最新版本

Sharp Aquos LC13B2UA Motherboard Replacement

你所需要的

  1. Sharp Aquos LC13B2UA Motherboard Replacement, Stand: 步骤 1 中的图像 1,2 Sharp Aquos LC13B2UA Motherboard Replacement, Stand: 步骤 1 中的图像 2,2
    • Place the TV face down on a flat smooth surface as to not scratch the screen.

    • Using a Phillips #2 screwdriver remove the four 8mm screws attaching the stand to the TV.

  2. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 2 中的图像 1,2 Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 2 中的图像 2,2
    • Lift the stand off the television.

  3. Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: 步骤 3 中的图像 1,3 Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: 步骤 3 中的图像 2,3 Sharp Aquos LC13B2UA Motherboard Replacement, Back Case: 步骤 3 中的图像 3,3
    • Remove the two back panels by prying them out with your hands.

  4. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 4 中的图像 1,2 Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 4 中的图像 2,2
    • Using a Phillips #2 screwdriver, remove the eight 6mm Phillips screws located around the edge.

    • Using a Phillips #2 screwdriver, remove the two 6mm Phillips screws located near the inputs.

  5. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 5 中的图像 1,1
    • Using your hands, gently lift and remove the back case of the television.

  6. Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: 步骤 6 中的图像 1,3 Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: 步骤 6 中的图像 2,3 Sharp Aquos LC13B2UA Motherboard Replacement, Motherboard: 步骤 6 中的图像 3,3
    • Remove the two speaker cables and the connector from the circuit board by pinching the plastic connectors and firmly pulling up.

    • Pull on the plastic part of the connector, even though it may seem easiest to pull on the wires.

  7. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 7 中的图像 1,2 Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 7 中的图像 2,2
    • Remove the green and gray power connector from the side of the buttons panel at the top of the television.

    • Remove the green/gray to orange/gray connector from the center of the circuit board.

  8. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 8 中的图像 1,2 Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 8 中的图像 2,2
    • Remove the four 5mm phillips screws attaching the LCD and circuit board to the front case.

  9. Sharp Aquos LC13B2UA Motherboard Replacement: 步骤 9 中的图像 1,1
    • Lift the circuit board/LCD block from the case by lifting the near side of the circuit board and sliding it under the button frame.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Robert Hobson

于01/20/11注册

1,275 声望

创作了9篇指南

团队

Cal Poly, Team 1-11, Amido Winter 2011 Cal Poly, Team 1-11, Amido Winter 2011 的会员

CPSU-AMIDO-W11S1G11

4 名成员

创作了9篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 1

过去 7 天: 2

过去 30 天: 6

总计 7,406