Shark Vertex Pro IZ682H Brush Roller Replacement

简介

This guides shows how to replace the brush roller on the power nozzle of your Shark Vertex Pro IZ682H vacuum.

步骤 1 Brush Roller

Shark Vertex Pro IZ682H Brush Roller Replacement, Brush Roller: 步骤 1 中的图像 1，1

Detach the power nozzle from the vacuum and turn it so the right side is facing you. Pull down the blue tab to the direction where the arrow is facing.
The brush roller should now pop out.
Putting the brush roller in again does not require pulling the blue tab. It should pop in with no problem.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与3其他贡献者

团队

UMass Dartmouth, Team 3-2, Botvin Fall 2022 UMass Dartmouth, Team 3-2, Botvin Fall 2022 的会员

UMASSD-BOTVIN-F22S3G2

2 名成员

创作了5篇指南

一条评论

Hey there, where can I find the replacement rollers? I have been looking around and I do not see any that name the product exactly or in listed in compatible. Are they standard size or something like that?

John Melo - 2024年4月15日回复

Shark Vertex Pro IZ682H Brush Roller Replacement

简介

步骤 1 Brush Roller

添加评论

作者

Tyree Brooks

团队

UMass Dartmouth, Team 3-2, Botvin Fall 2022 UMass Dartmouth, Team 3-2, Botvin Fall 2022 的会员

一条评论

添加评论

嵌入本指南

预览