修复你的物品 社区 商店

Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement

简介

This guide will show you how to replace the HEPA filter which is responsible for trapping small particles that can be easily recirculated into the air. When the HEPA Filter is extremely dirty, you may want to consider replacing it.

  1. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: 步骤 1 中的图像 1，2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement, HEPA Filter: 步骤 1 中的图像 2，2

    • Push the red Lift Away button down and lift up on the vacuum handle to detach the base.

    • The handle was removed for convenience but is not required.

    编辑

  3. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 步骤 2 中的图像 1，2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 步骤 2 中的图像 2，2

    • Remove the red cover from the front of the vacuum by pulling the latch found at the bottom of the cover forward and moving the whole cover downward.

    编辑

  4. Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 步骤 3 中的图像 1，2 Shark Rotator Slim-Light Lift-Away Upright HEPA Filter Replacement: 步骤 3 中的图像 2，2

    • Remove the filter by pulling it straight out.

    • To clean the filter, rinse it under water and allow it to dry before placing it back in the vacuum.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与4其他贡献者

Carson Craft

于01/24/18注册

251 声望

撰写一个指南

徽章: 10

+ 7更多徽章

团队

Cal Poly, Team S19-G3, White Winter 2019 Cal Poly, Team S19-G3, White Winter 2019 的会员

CPSU-WHITE-W19S19G3

5 名成员

创作了12篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 7

过去 30 天： 13

总计 367