简介

Dust will build up on the filter over time and block the airway, which will reduce the efficiency of the machine. This guide will show you how to replace a dirty or old Post-Motor Filter on your Shark Rocket Powerhead AH401.

工具

无需工具。

  1. Ensure the device is turned off and unplugged from any power source before beginning work.
    • Ensure the device is turned off and unplugged from any power source before beginning work.

    • Push down on the dust can lever to release the dust can in order to get to the filter grill.

    添加评论

  2. Remove the dust cup by lifting it off the dock.
    • Remove the dust cup by lifting it off the dock.

    添加评论

    • Push inward on the top of the filter grille where it says "Push."

    • Lift the filter grille upward.

    添加评论

    • Lift gently and pull the grille up towards you until it releases.

    • The post-motor filter is underneath the filter grille.

    添加评论

    • Remove the filter by pulling it out and away from the device with your hand.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Shobhit Dabral

于2018年01月24日注册

712 信誉积分

创作了6篇指南

团队

Cal Poly, Team S19-G3, Livingston Winter 2018 Cal Poly, Team S19-G3, Livingston Winter 2018 的会员

CPSU-LIVINGSTON-W18S19G3

4 名成员

创作了9篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 1

总计 44