修复你的物品 社区 商店

Shark Professional Steam Pocket Mop Front Panel Disassembly

撰写者： Brett Wilson (和另外2个贡献者)
发布于： May 21, 2018
  • 评论： 2
  • 收藏 0
  • 浏览量 3.9千

Shark Professional Steam Pocket Mop Front Panel Disassembly

撰写者： Brett Wilson (和另外2个贡献者)
发布于： May 21, 2018
  • 评论： 2
  • 收藏 0
  • 浏览量 3.9千

拆解

简介

This guide will start with opening the front panel. This will expose the control panel and more screws for further disassembly. Before doing any disassembly on your Shark Professional Steam Pocket Mop, make sure to unplug both the mop and empty the water tank for your safety.

你所需要的

这个拆解是不是维修指南。 要维修你的的Shark Professional Steam Pocket Mop，请使用我们的维修手册。

  1. Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 1 中的图像 1，2 Shark Professional Steam Pocket Mop Front Panel Disassembly, Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 1 中的图像 2，2

    • Unwrap the power cord from the handle.

    • Remove the 56.0 mm Phillips head #2 screw located above the water tank cap.

    • Pull the handle to separate it from the body.

    编辑

  2. Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 2 中的图像 1，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 2 中的图像 2，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 2 中的图像 3，3

    • Remove the three 12.0 mm Phillips head #2 screws where the handle connects to the body.

    • Remove the plastic cap.

    编辑

  4. Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 3 中的图像 1，2 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 3 中的图像 2，2

    • Remove the three 16.0 mm T10 Torx screws near the top of the body and remove the water tank cap.

    • The third screw is directly on other side of the bottom screw in the photo.

    编辑

  5. Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 4 中的图像 1，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 4 中的图像 2，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 4 中的图像 3，3

    • Remove steam control button cover with a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Remove the plastic rim with clear plastic cover.

    编辑

  6. Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 5 中的图像 1，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 5 中的图像 2，3 Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 5 中的图像 3，3

    • Remove the Shark logo decal on the front of body using a metal spudger.

    • Remove the two 12.0 mm Phillips head #2 screws underneath.

    • Pull out the plastic cover to remove.

    编辑

  7. Shark Professional Steam Pocket Mop Front Panel Disassembly: 步骤 6 中的图像 1，1

    • Pop off the grey front plate to expose the control panel and screws necessary to open mop body.

    编辑

作者

与2其他贡献者

Brett Wilson

于02/12/18注册

992 声望

创作了6篇指南

徽章: 14

+ 11更多徽章

团队

USF Tampa, Team S15-G1, Boczar Spring 2018 USF Tampa, Team S15-G1, Boczar Spring 2018 的会员

USFT-BOCZAR-S18S15G1

4 名成员

创作了14篇指南

一条评论

Here is a video to help with dismantling if you'd like to see the possible original guide first posted on YouTube by George Robles September 16, 2015 years before.

https://youtu.be/18mMbbMjqzs

No one knew or posted before me because I looked everywhere and why I created the video.

But I am curious where you got your information from if it was not my video.

George Robles - 回复

添加评论

浏览统计数据:

过去 24 小时： 10

过去 7 天： 29

过去 30 天： 99

总计 3,915