修复你的物品 社区 商店

Shark Matrix RV2310 Bumper Plate Replacement

简介

This guide will show you how to remove/replace the bumper plate assembly on your Shark Matrix RV2310. This is most useful in scenarios where your vacuum's bumper assembly has been cracked or broken, leaving the sensor components underneath vulnerable.

你所需要的

  1. Shark Matrix RV2310 Bumper Plate Replacement, Bumper Plate: 步骤 1 中的图像 1，2 Shark Matrix RV2310 Bumper Plate Replacement, Bumper Plate: 步骤 1 中的图像 2，2

    • Remove the six 8 mm hex screws that are holding both pieces of the bumper plate together.

    翻译

  3. Shark Matrix RV2310 Bumper Plate Replacement: 步骤 2 中的图像 1，3 Shark Matrix RV2310 Bumper Plate Replacement: 步骤 2 中的图像 2，3 Shark Matrix RV2310 Bumper Plate Replacement: 步骤 2 中的图像 3，3

    • Separate both pieces of the plate from one another by pulling them apart.

    • Pull the full bumper plate assembly away from the vacuum.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与1其他贡献者

Joshua Correia

于03/22/24注册

607 声望

创作了5篇指南

徽章: 5

+ 2更多徽章

团队

UMass Dartmouth, Team 6-4, Botvin Spring 2024 UMass Dartmouth, Team 6-4, Botvin Spring 2024 的会员

UMASSD-BOTVIN-S24S6G4

2 名成员

创作了5篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 2

过去 7 天： 2

过去 30 天： 11

总计 25