本指南有最近更改,您可查看未经巡查的最新版本。
简介
Following this guide requires cutting wires and soldering. For more information on soldering visit the soldering guide.
你所需要的
-
-
Squeeze Dust Cup release buttons on either side of the component.
-
Pull up to release Dust Cup.
-
-
-
Remove the five 15 mm screws by twisting counterclockwise with a T10 Torx screwdriver.
-
-
即将完成!
To reassemble your device, follow these instructions in reverse order.
结论
To reassemble your device, follow these instructions in reverse order.
2等其他人完成本指南。