Shark Cordless Pet Perfect Front Belt Replacement

当前版本的文档还未经巡查，您可以查看最新的已查核版本。

你所需要的

步骤 1

这个步骤还没有翻译帮忙翻译一下

Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.

翻译

步骤 2

这个步骤还没有翻译帮忙翻译一下

Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.

翻译

步骤 3

这个步骤还没有翻译帮忙翻译一下

Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.

翻译

步骤 4

这个步骤还没有翻译帮忙翻译一下

Remove the belt from the motor mount, and then replace with a new belt.

翻译

Do you guys have a guide on replacing the smaller white rolling piece that is part of the motor mount? This is the reason why the brush roller doesn’t spin on my shark cordless vacuum. The piece itself is too small to fit on the motor or maybe the motor’s too big for that piece. I’m seriously getting to the point that I want to just toss this piece in the trash. Any help would be greatly appreciated.

ELIZABETH REYES - 2018年5月9日回复

My Dad was cleaning out the hair and the belt fell off and he doesn’t know how to put it back on. Unfortunately the directions above doesn’t explain how to put it back on if you didn’t take it off.

TonMann - 2020年4月13日回复

When putting the belt back on does one end go around the little white gear or in front of it? I’m talking about the little white gear that is like the large white gear and is about 1/4”

Pepper - 2021年3月13日回复