跳转到主内容

简介

If you are having a problem with your device's Front Belt, Here is a Step by step guide to replace a faulty or broken Front Belt.

配件

没有特定配件。

  1. Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit. Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.
    • Remove the two 12mm screws from the front face plate with the PH2 bit from the tool kit.

  2. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor. Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.
    • Once the screws are removed pull the front face plate off. This will allow access to the belt and motor.

  3. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt. Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.
    • Lift the brush roller upwards towards you, and the brush roller should come out along with the belt.

  4. Remove the belt from the motor mount, and then replace with a new belt. Remove the belt from the motor mount, and then replace with a new belt.
    • Remove the belt from the motor mount, and then replace with a new belt.

    Do you guys have a guide on replacing the smaller white rolling piece that is part of the motor mount? This is the reason why the brush roller doesn’t spin on my shark cordless vacuum. The piece itself is too small to fit on the motor or maybe the motor’s too big for that piece. I’m seriously getting to the point that I want to just toss this piece in the trash. Any help would be greatly appreciated.

    ELIZABETH REYES - 回复

    My Dad was cleaning out the hair and the belt fell off and he doesn’t know how to put it back on. Unfortunately the directions above doesn’t explain how to put it back on if you didn’t take it off.

    TonMann - 回复

    When putting the belt back on does one end go around the little white gear or in front of it? I’m talking about the little white gear that is like the large white gear and is about 1/4”

    Pepper - 回复

结论

To reassemble your device, follow these instructions in reverse order.

Ben Dzugen

于2017年02月02日注册

374 信誉积分

创作了3篇指南

团队

USF Tampa, Team 16-2, Blackwell Spring 2017 USF Tampa, Team 16-2, Blackwell Spring 2017 的会员

USFT-BLACKWELL-S17S16G2

4 名成员

创作了6篇指南

2条评论

Nice and simple but where can we purchase the belts?

jmrlachance - 回复

My shark pet vacuum didn't come with lint brush roller. How do I get one. I buy these pet vacuum for friends/family. Please respond

Tina Cherney - 回复

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 5

过去的30天: 28

总计 1,807