修复你的物品 社区 商店

Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement

简介

This guide will show you how to take apart the fan to remove the Printed Circuit Board.

你所需要的

  1. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement, PCB (Printed Circuit Board): 步骤 1 中的图像 1，1

    • Use the Phillips #2 screwdriver to remove the four 6 mm screws by unscrewing counterclockwise.

    编辑

  2. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: 步骤 2 中的图像 1，1

    • Pull the front and back cover apart.

    • Be careful not to pull the front cover off completely. It holds the wires.

    编辑

  4. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: 步骤 3 中的图像 1，1

    • Remove the Phillips 6 mm screw that holds the circuit board to the outer shell of the fan.

    • Shock warning: Make sure the fan is unplugged before removing the circuit board.

    编辑

  5. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: 步骤 4 中的图像 1，1

    • Remove the top cover containing the circuit board and the wires by pulling it away from the outer shell of the fan.

    编辑

  6. Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: 步骤 5 中的图像 1，2 Seville Classics MSC10166 PCB (Printed Circuit Board) Replacement: 步骤 5 中的图像 2，2

    • Remove the screws from the four corners of the circuit board.

    • Remove the circuit board from the top cover.

    • Do not touch the other side of the circuit board to avoid damaging the circuit elements.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与12其他贡献者

Mateo Begue

于09/26/12注册

102 声望

创作了2篇指南

徽章: 7

+ 4更多徽章

团队

Cal Poly, Team 15-46, Forte Fall 2012 Cal Poly, Team 15-46, Forte Fall 2012 的会员

CPSU-FORTE-F12S15G46

5 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 6

过去 30 天： 14

总计 1,484