Self-Balancing Board Remote control Bluetooth Replacement

Remove 10 screws with a cross-head screwdriver to access a part of the hoverboard.

The electronic boards are mirrored on both sides, so you can choose one of the 2 by evaluating which of these are available for Bluetooth setup

unhook the lighting and canbus cables to remove the cover

Remove the 4 screws that hold the electronic card holder

Rimuovere le 4 viti che fissano la scheda al supporto

Correct position for welding the Bluetooth card.

Using a tin soldering station, secure the 4 pins of the Bluetooth card on the hoverboard board

Before soldering the boards I recommend checking the functionality of the Bluetooth card simply by inserting the pins that is sufficient