简介

Disassembly instructions to get at the hard drive of a Seagate FreeAgent 880GB drive

配件

无需配件。

  1. This guide holds true for most all FreeAgentGo drives that have this body style
    • This guide holds true for most all FreeAgentGo drives that have this body style

    添加评论

  2. The first thing you'll need to do is get a spudger of some sort and get underneath an edge. It doesn't expressly matter which, I found starting at the front corner the the easiest.
    • The first thing you'll need to do is get a spudger of some sort and get underneath an edge. It doesn't expressly matter which, I found starting at the front corner the the easiest.

    • Work your way all the way around the edges, the cover is being held in place by rubber cement-like glue.

    添加评论

    • As you can see here, the back edge where the light is has a small connector to the rest of the board. this pulls out easily.

    添加评论

    • The bottom casing lets the drive fall out and you have two metal shielding pieces holding the drive in place with four rubber bumpers. The USB dongle is held in place with tape, but it's easily pulled up and removed from the plug.

    添加评论

    • After the USB dongle is removed, there are four phillips screws on the sides that hold the two metal pieces in place. Once those are removed, the rubber bumpers are easily removed as they are only held in place by the cement as well.

    添加评论

    • The top cover slides backwards, away from the board to allow access to the 888GB drive. The drive pulls out from here and easily disconnects from the controller board.

    decent teardown. Just a suggestion, use natral lightning from the sun. The camera's flash doesn't help when your that close.

    Nicholas Ouimet - 回复

    Very good teardown. It would be good to know if it is a ATA drive or SATA type in case anyone needs to replace it.

    alan - 回复

    Do you have to do anything to the drive to make it work in the enclosure? Does the enclosure care if the new drive is a different size/brand?

    Marshall Ringler - 回复

结论

To reassemble your device, follow these instructions in reverse order.

7等其他人完成本指南。

zenmastr

于2009年11月05日注册

359 信誉积分

撰写一个指南

添加评论

浏览统计数据:

过去的24小时: 2

过去的7天: 17

过去的30天: 71

总计 31,597