Before disassembling the device, make sure it is powered off.
  • Before disassembling the device, make sure it is powered off.

  • Remove the four 1.5mm screws on the back of the device.

添加评论

Using a plastic opening tool, lift the metal backing from the front of the device.
  • Using a plastic opening tool, lift the metal backing from the front of the device.

添加评论

  • Pull the rear panel off of the Sansa e260R.

添加评论

  • Grip the bottom of the battery with your thumb and forefinger and pull it away from the device.

添加评论

  • Remove the four 1.5mm screws on the inner casing of the device.

  • These screws are very small and hard to extract from the casing. It may be helpful to use a magnetic screwdriver.

添加评论

  • Flip the device so that the front is facing you.

  • Slide a plastic opening tool between the plastic front cover and the metal back cover of the device.

添加评论

  • Pull the front cover away from the rest of the device.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Casey Smith

于2012年01月20日注册

87 信誉积分

创作了3篇指南

团队

Cal Poly, Team 8-15, Maness Winter 2012 Cal Poly, Team 8-15, Maness Winter 2012 的会员

CPSU-MANESS-W12S8G15

5 名成员

创作了5篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 2

总计 1,719