配件

无需配件。

  1. Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.
    • Use a #0 Phillips head screwdriver to remove the four small black screws from the back of the device.

    • To ensure you don't lose any tiny parts during the replacement process, place parts on the white magnetic sheet.

    • Once the screws have been removed, proceed to take off back cover.

    添加评论

  2. Now, proceed to lift the battery out and remove it.
    • Now, proceed to lift the battery out and remove it.

    添加评论

    • Use a #0 Phillips screwdriver to remove the four small silver screws from the outside corners of the battery housing.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Now gently pry the front cover off. A Black Spudger can be used to assist in the removal of the cover.

    添加评论

    • Gently separate the mainboard from the battery housing. This may be difficult around the headphone jack. Use a spudger if necessary.

    • Pull the motherboard out and down away from the top of the phone.

    添加评论

    • Peel off the small foam rectangle on the back of the mainboard and set to the side.

    • Peel off the black tape and set off to the side.

    添加评论

    • Gently pry up the memory chip and replace it with the new one.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Lauren

于2014年02月13日注册

43 信誉积分

创作了2篇指南

团队

Ohio State, Team 1-4, Buehl Spring 2014 Ohio State, Team 1-4, Buehl Spring 2014 的会员

OSU-BUEHL-S14S1G4

3 名成员

创作了3篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 3

总计 579