简介

With this guide you will learn how to replace faulty battery spring contacts that may have been disconnected from motherboard or corroded by and exploding battery.

  1. Remove the battery compartment cover.
    • Remove the battery compartment cover.

    • Remove the battery.

    添加评论

  2. Locate and remove the screw next to the battery compartment lid.
    • Locate and remove the screw next to the battery compartment lid.

    添加评论

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    添加评论

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    添加评论

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • You now have access to all components found on the inside of the device!

    添加评论

    • Locate both battery spring contacts, if necessary, on the motherboard.

    添加评论

    • Apply heated soldering iron to points where the contacts are soldered to the motherboard.

    添加评论

    • Soldering irons, when heated, are very hot and can potentially burn the user.

    • Be sure to always elevate the hot end of the soldering iron on a metal stand to prevent incidental burns.

    添加评论

    • With solder melted, remove battery spring contacts from the motherboard.

    添加评论

    • Replace spring contacts with new ones.

    添加评论

    • There may be some solder in the way of the spring contacts' metal contacts. If this occurs simply melt the solder to create room for the contacts.

    添加评论

    • With the new battery spring contacts in place, use the soldering iron to apply new solder to the connection points.

    • Be sure to allow the new solder to cool and harden.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

James Thorne

于2013年11月05日注册

625 信誉积分

创作了6篇指南

团队

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 的会员

UMASSD-SHASTANY-F13S1G8

3 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 3

过去的30天: 5

总计 369