修复你的物品 社区 商店

Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement

简介

Follow this guide to replace a faulty headphone jack in your Sandisk Sansa m230 Series MP3 Player.

你所需要的

  1. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement, Sandisk Sansa m230 Series mp3 player Teardown: 步骤 1 中的图像 1，1

    • Remove the battery compartment cover.

    • Remove the battery.

    翻译

  2. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 2 中的图像 1，1

    • Locate and remove the screw next to the battery compartment lid.

    翻译

  3. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 3 中的图像 1，1

    • Locate the interlocking pegs along the seam of the device's casings.

    • Gently pry the pegs apart one at a time, working your way around the case.

    • Be careful when prying apart the pegs: they are made of plastic and may break.

    翻译

  4. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 4 中的图像 1，1

    • The battery contact springs may prevent the case from separating.

    • Push the battery contact springs down through the hole in the case.

    翻译

  6. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 5 中的图像 1，1

    • The casing protecting the USB and headphone jacks must be removed.

    • Locate and gently pry apart the two interlocking clips holding it in place.

    • The outer casings may now be removed and the MP3 player should separate.

    翻译

  7. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 6 中的图像 1，1

    • You now have access to all components found on the inside of the device!

    翻译

  8. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement, Headphone Jack: 步骤 7 中的图像 1，1

    • Locate the headphone jack on the motherboard.

    翻译

  9. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 8 中的图像 1，1

    • Ensure the hot end of the soldering iron is elevated on a metal stand when not in use to prevent burns.

    • The solder and soldering iron are very hot! Do not touch unless you are wearing appropriate protective gloves.

    翻译

  10. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 9 中的图像 1，3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 9 中的图像 2，3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 9 中的图像 3，3

    • Use soldering iron to melt the existing solder at the three headphone jack connections.

    翻译

  11. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 10 中的图像 1，1

    • Remove the faulty headphone jack from the motherboard.

    翻译

  12. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 11 中的图像 1，1

    • Align the new headphone jack appropriately on the motherboard for soldering.

    翻译

  13. Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 12 中的图像 1，3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 12 中的图像 2，3 Sandisk Sansa m230 Series MP3 Player Headphone Jack Replacement: 步骤 12 中的图像 3，3

    • Use the soldering iron and solder to create three stable connections between the motherboard and the headphone jack.

    • Allow the new solder to cool and harden before reassembling the MP3 player.

    翻译
结论

To reassemble your device, follow these instructions in reverse order.

作者

与11其他贡献者

James Thorne

于11/05/13注册

638 声望

创作了6篇指南

徽章: 7

+ 4更多徽章

团队

UMass Dartmouth, Team 1-8, Shastany Fall 2013 UMass Dartmouth, Team 1-8, Shastany Fall 2013 的会员

UMASSD-SHASTANY-F13S1G8

3 名成员

创作了6篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 1

总计 1,146