跳转到主内容
  1. Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.
    • Pry up the small black piece of plastic located between the volume [-] button and the HOLD/ON button.

  2. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
  3. Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long).  Use a Phillips #000 screwdriver to remove it.
    • Underneath the piece of plastic you just removed, there is a small screw (Phillips #000, 2.0 mm long). Use a Phillips #000 screwdriver to remove it.

  4. Push on the backplate with both thumbs, sliding it towards the top of the device. Once it begins to move, lift up slightly.  You can then slide the backplate all the way off.
    • Push on the backplate with both thumbs, sliding it towards the top of the device.

    • Once it begins to move, lift up slightly. You can then slide the backplate all the way off.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Andrew Groeneveld

于2014年02月24日注册

495 信誉积分

创作了4篇指南

团队

Michigan Tech, Team 5-3, Lauer Spring 2014 Michigan Tech, Team 5-3, Lauer Spring 2014 的会员

MTU-LAUER-S14S5G3

4 名成员

创作了6篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 1

过去的30天: 5

总计 452