本指南有最近更改,您可查看未经巡查的最新版本。
简介
This is a prerequisite guide to take off the back cover assembly.
你所需要的
-
-
Remove the 7 screws on the outside of the camera
-
Two 5 mm PH000 screws on the right side of the camera body
-
Four 3mm PH000 screws on the bottom and the left side of the camera body.
-
Use the plastic spundger to push the back casing out. Start from the right side and work your way clockwise around the case.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
另外一个人完成了本指南。