修复你的物品 社区 商店

Samsung SmartThings Hub Motherboard Replacement

简介

This guide outlines a procedure for completely removing and replacing a non-functioning motherboard on the Samsung SmartThings Hub.

你所需要的

  1. Samsung SmartThings Hub Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，1

    • To open your device, gently slide the grey bottom cover in the direction of the arrow as shown.

    编辑

  2. Samsung SmartThings Hub Motherboard Replacement: 步骤 2 中的图像 1，3 Samsung SmartThings Hub Motherboard Replacement: 步骤 2 中的图像 2，3 Samsung SmartThings Hub Motherboard Replacement: 步骤 2 中的图像 3，3

    • Make sure the batteries are removed before attempting disassembly.

    • Using your Phillips #1 screwdriver, remove the four visible 12.5mm screws.

    • Next, either peel up the longer of the two stickers or punch a hole with the tip of your screwdriver to access the fifth 12.5mm screw.

    编辑

  4. Samsung SmartThings Hub Motherboard Replacement: 步骤 3 中的图像 1，3 Samsung SmartThings Hub Motherboard Replacement: 步骤 3 中的图像 2，3 Samsung SmartThings Hub Motherboard Replacement: 步骤 3 中的图像 3，3

    • Once all five screws are removed, split the casing apart by applying gentle upwards pressure against the positive terminals in the battery compartment.

    编辑

  5. Samsung SmartThings Hub Motherboard Replacement: 步骤 4 中的图像 1，2 Samsung SmartThings Hub Motherboard Replacement: 步骤 4 中的图像 2，2

    • To remove the motherboard, grip the USB port and the Ethernet port. Lift up, then slide towards the front of the device to release the motherboard from the black retaining clip shown on the right.

    编辑

  6. Samsung SmartThings Hub Motherboard Replacement: 步骤 5 中的图像 1，1

    • Replace with new, known-good motherboard.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

4等其他人完成本指南。

0条评论

添加评论

浏览统计数据:

过去 24 小时： 1

过去 7 天： 1

过去 30 天： 5

总计 1,491