Samsung Series 3 NP300E5A-A02UB Panel Replacement

简介

To get to key parts of the computer, such as the disc drive and the motherboard, you will have to remove the two bottom panels of the computer. Once you have done this, you will be able to get to the innards of the computer for repairs or replacements. This guide will walk you through the steps of removing these panels.

你所需要的

步骤 1 Battery

Samsung Series 3 NP300E5A-A02UB Panel Replacement, Battery: 步骤 1 中的图像 1，1

Place the computer upside down, with the battery pack facing away from you.

编辑

步骤 2

Remove the battery by pushing out the locks on either end then pushing the battery away from you.

编辑

步骤 3 Panel

Samsung Series 3 NP300E5A-A02UB Panel Replacement, Panel: 步骤 3 中的图像 1，1

Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw on the ODD/HDD Memory panel.

编辑

步骤 4

Pull the panel towards you to release it, then lift it off the computer.

编辑

步骤 5

Using the J0 Japanese Industrial Standard screwdriver, remove the 4.5mm screw next to the label “ODD."
Remove the three 4.5mm screws from around the memory drive nest.

编辑

步骤 6

Using the J1 Japanese Industrial Standard screwdriver, remove the thirteen 9.5mm screws from the panel that cover the bottom of the computer.

编辑

步骤 7

Samsung Series 3 NP300E5A-A02UB Panel Replacement: 步骤 7 中的图像 3，3

Begin removing the computer casing by prying beside the disk drive with the iFixit opening tool and the spudger, working counterclockwise.
Lift the panel from the computer.

编辑