跳转到主内容

简介

This is a step by step guide on how to replace the Samsung SPH-A500 logic board.

配件

没有特定配件。

  1. Turn phone over
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

  2. Remove the battery from the phone, which will reveal four screws at the corners of the phone.
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

  3. Remove all four screws using a small Philips screwdriver.
    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

  4. iPhone 电池维修工具包

    只要 $29.99

    Buy Now

    iPhone 电池维修工具包

    只要 $29.99

    Buy Now
  5. Remove back cover by carefully prying it open.
    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

  6. Pull the side tabs outward while simultaneously lifting up the circuit board.
    • Pull the side tabs outward while simultaneously lifting up the circuit board.

    • Do not completely pull out the circuit board.

  7. Look for the clip at the top right corner of the logic board.
    • Look for the clip at the top right corner of the logic board.

  8. Remove the clip from the logic board.
    • Remove the clip from the logic board.

  9. Remove the logic board.
    • Remove the logic board.

    • Replace the broken logic board with a new one.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nick Dominikovic

于2010年04月13日注册

139 信誉积分

创作了4篇指南

团队

Cal Poly, Team 18-100, Johann Spring 2010 Cal Poly, Team 18-100, Johann Spring 2010 的会员

CPSU-JOHANN-S10S18G100

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,888