跳转到主内容

简介

Repair guide on how to replace the keypad in a Samsung SPH-A500.

  1. Turn phone over
    • Turn phone over

    • Push the gray tab above the battery forward to remove the battery.

  2. Remove the battery from the phone, which will reveal four screws at the corners of the phone.
    • Remove the battery from the phone, which will reveal four screws at the corners of the phone.

  3. Remove all four screws using a small Philips screwdriver.
    • Remove all four screws using a small Philips screwdriver.

    • Note: The screws do not need to be completely removed from the case, as long as they are unscrewed.

  4. PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物

    PC 笔记本电池

    所有顶级PC品牌的电池均以我们的质量保证为后盾。

    现在开始购物
  5. Remove back cover by carefully prying it open.
    • Remove back cover by carefully prying it open.

    • Note: Some force may be required.

  6. Pull the side tabs outward while simultaneously lifting up the circuit board.
    • Pull the side tabs outward while simultaneously lifting up the circuit board.

  7. Lift circuit board from the bottom of the phone.
    • Lift circuit board from the bottom of the phone.

    • WARNING: DO NOT completely remove circuit board from the phone, since it is still attached at the top of the phone.

  8. Flip the circuit board around the top of the phone.
    • Flip the circuit board around the top of the phone.

    • Lift the rubber keypad off.

  9. Replace the keypad.
    • Replace the keypad.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

Nick Dominikovic

于2010年04月13日注册

139 信誉积分

创作了4篇指南

团队

Cal Poly, Team 18-100, Johann Spring 2010 Cal Poly, Team 18-100, Johann Spring 2010 的会员

CPSU-JOHANN-S10S18G100

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,690