简介

Introduction

This guide will teach readers on how to replace the face plate of their Samsung SGH-X495. It will explain how to identify push pins and tabs and also how to remove them.

  1. First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.
    • First, remove the 2 silver stickers (as indicated by the circles) with a a safety or push pin to reveal 2 screws.

    添加评论

  2. Remove the 2 (5.6 mm) philips head screws with your safety or push pin.
    • Remove the 2 (5.6 mm) philips head screws with your safety or push pin.

    添加评论

    • As shown above, with a plastic pry tool, begin working at the top corner and down each side. The face plate has 10 tabs that hook into the phone's body.

    • Before removing the 2 tabs on the bottom, the 3 tabs on either side must be free first.

    • Note: The bottom 2 are the most challenging to remove.

      • Note: When reassembling start with the bottom two tabs.

    添加评论

    • Continue down each side toward the bottom with your pry tool.

    • Note: It may help to use multiple pry tools to help hold it open.

    • Second photo: location of the tabs.

    添加评论

    • With 8 tabs released, the face plate is nearly free.

    • With the phone in your left hand, gently wiggle the face plate from side to side and push the face place upward.

    • Note: A strip of double sided tape holds the faceplate, so expect some resistance

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

于2011年01月05日注册

1,031 信誉积分

创作了10篇指南

团队

Cal Poly, Team 3-40, Regan Winter 2011 Cal Poly, Team 3-40, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G40

4 名成员

创作了20篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,946