1. Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top.
    • Use thumb nail to release the white hook; then use fingertip to pry the battery loose starting from the top.

    • Second photo gives a view from the back of the phone and battery.

    添加评论

  2. Remove the 4 (4.7mm) philips head screws.
    • Remove the 4 (4.7mm) philips head screws.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Unplug the rubber charger outlet cover.

    添加评论

    • Unplug the rubber headset jack cover.

    添加评论

    • Begin by inserting the pry tool near the charger jack.

    • There are 4 tabs to release.

      • Start at the bottom and slide the tool up, lifting the silver front of the phone away from the white backing.

    • Loosen the 2 side tabs before moving on to the top two.

    • See the second photo to see location of the tabs.

    • Be careful of the ribbon wires shown in second photo.

    添加评论

    • Once the two side tabs are free; gently pry the white backing down to release the top two tabs.

    • Hold the phone with the left hand as shown

    • Wiggle the white backplate from side to side while pulling down with the right hand.

    • Be careful of the ribbon wires shown in second photo.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Matthew Hove

于2011年01月05日注册

1,031 信誉积分

创作了10篇指南

团队

Cal Poly, Team 3-40, Regan Winter 2011 Cal Poly, Team 3-40, Regan Winter 2011 的会员

CPSU-REGAN-W11S3G40

4 名成员

创作了20篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,189