简介

The screen is connected to a circuit board. These two pieces will be removed as one unit. Do not try and disconnect the circuit board from the screen.

  1. Flip phone over and locate the screw covers.
    • Flip phone over and locate the screw covers.

    • Remove the two thin screw covers using the tweezers.

    添加评论

  2. Locate the two screws (3mm) at the base of the top portion of the cell phone.
    • Locate the two screws (3mm) at the base of the top portion of the cell phone.

    • Remove screws using a phillips head #000 screwdriver.

    • Place screws on magnetic mat.

    添加评论

    • Locate the seam of the casing along the edge of the phone.

    • Starting at the end, gently begin to pry the front casing away from the phone. Use the plastic opening tool for this step.

    添加评论

    • Continue to pry the casing from the front of the cell phone.

    • Remove front casing from the cell phone.

    添加评论

  3. 传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    传播 Fixmas 欢乐
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Locate the small battery at the end of the cell phone.

    • Gently remove the battery from the cell phone using tweezers.

    • Note: This may require some force.

    • Do not disconnect the battery from the entire phone. Simply lift the battery from the cell phone while keeping the wires connected.

    添加评论

    • Locate the speaker at the end of the cell phone.

    • Gently grasp and lift the speaker from the cell phone using tweezers.

    • Do not disconnect the speaker from the entire cell phone. Simply lift the speaker while leaving the wires connected.

    添加评论

    • Locate the tip of the sheer protection film.

    • Gently lift and remove the protection film with tweezers.

    添加评论

    • Locate the top tabs of the screen and circuit board unit

    • Gently lift the screen and circuit board as one unit from the cell phone using the tweezers.

    • Make sure the screen and circuit board are removed as one unit. Do not disconnect the screen from the circuit board.

    添加评论

    • Locate the gold connector that is attached to the circuit board.

    • Pull the connection away from the circuit board.

    • Note: This may require some force.

    添加评论

    • Completely remove the screen and circuit board unit from the cell phone.

    添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Yi Ren

于2014年03月26日注册

801 信誉积分

创作了8篇指南

团队

Clemson, Team 1-4, Benson Spring 2014 Clemson, Team 1-4, Benson Spring 2014 的会员

CLEM-BENSON-S14S1G4

3 名成员

创作了16篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 3

总计 214