简介

Items needed:

You will need a wedge shaped tool in order to pry open the front panel of cell phone and a screwdriver.

Remove the plastic coverings at the base of the LCD screen using your fingers.
  • Remove the plastic coverings at the base of the LCD screen using your fingers.

添加评论

Remove the two 4.5mm screws located underneath the plastic coverings.
  • Remove the two 4.5mm screws located underneath the plastic coverings.

  • You may want to use tweezers to remove the loosened screws.

添加评论

  • Wedge the plastic opening tool under the crevice on the inner surface of the phone screen.

  • Gently pry the top panel off around the entire frame.

添加评论

  • Make sure that the top panel is completely separated from the LCD display around the entire perimeter.

添加评论

  • Remove the top panel.

添加评论

  • Detach the connecting wire panel from the LCD display system.

添加评论

  • Using tweezers, remove the camera from the cellphone casing.

添加评论

结论

To reassemble your device, follow these instructions in reverse order.

Michael Strange

于2011年01月30日注册

101 信誉积分

创作了2篇指南

团队

Cal Poly, Team 11-23, Maness Winter 2011 Cal Poly, Team 11-23, Maness Winter 2011 的会员

CPSU-MANESS-W11S11G23

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 1,319