Samsung SGH-A237 Keypad Replacement

简介

With this guide you can clean or repair a faulty keypad.

你所需要的

步骤 1 Keypad

Samsung SGH-A237 Keypad Replacement, Keypad: 步骤 1 中的图像 1，2

Samsung SGH-A237 Keypad Replacement, Keypad: 步骤 1 中的图像 2，2

Place phone face down so battery cover is showing.

编辑

步骤 2

Use thumb to push the cover down and off.
Lift battery cover off the device.

编辑

步骤 3

Remove the five screws with a size 00 screwdriver. There are 4 in the corners and one on the top as shown.

编辑

步骤 4

Samsung SGH-A237 Keypad Replacement: 步骤 4 中的图像 3，3

Be sure that all 5 screws are removed and start to carefully remove the back cover by using the iPod Opening Tool in the slots on the bottom of the device.
Some force must be applied, and the back cover should come off.

编辑

步骤 5

Detach the tab from the logic board shown by using the Ipod Opening Tool

编辑

步骤 6

Use the Ipod Opening Tool to lift the green logic board carefully.
Remove the logic board from the device.

编辑

步骤 7

The keypad should peel off the logic board with a gentle pull.
Use a clean, soft, cotton cloth to gently remove any debris or liquid that may be located on the pad or logic board interface.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

作者

与7其他贡献者

Shawn

于04/14/10注册

1 声望

创作了2篇指南

徽章: 5

+ 2更多徽章

团队

Cal Poly, Team 29-81, Johann Spring 2010 Cal Poly, Team 29-81, Johann Spring 2010 的会员

CPSU-JOHANN-S10S29G81

4 名成员

创作了8篇指南

一条评论

This was very helpful. There is no other place I could find a guide to take this phone apart. Even Samsung chat was unable to help!! Thanks very much!

Steve - 2012年7月19日回复

Samsung SGH-A237 Keypad Replacement

简介

你所需要的

步骤 1 Keypad

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

步骤 7

添加评论

作者

Shawn

团队

Cal Poly, Team 29-81, Johann Spring 2010 Cal Poly, Team 29-81, Johann Spring 2010 的会员

一条评论

添加评论

嵌入本指南

预览