跳转到主内容

修复你的物品

维修的权力

配件 & 工具

简介

This guide will instruct the user how to replace the camera of the Samsung SGH-A237 cell phone. Prior experience of replacing the camera is not necessary.

  1. Place the phone on a flat surface with the camera facing upwards.
    • Place the phone on a flat surface with the camera facing upwards.

    • Have a designated space to keep track of each small part.

  2. Open the phone.
    • Open the phone.

    • Remove the two rubber soft screw covers below the viewing screen using a pair of tweezers.

  3. Loosen the screws under the soft screw covers using a Phillips #00 screwdriver.
    • Loosen the screws under the soft screw covers using a Phillips #00 screwdriver.

  4. LCD iPhone 屏幕维修套装

    预算选项,涵盖在我们的终身保修中。

    购买套装

    LCD iPhone 屏幕维修套装

    削减维修成本,而不是质量。

    购买套装
  5. Failure to utilize the specified tool may cause damage to the device. Locate the black cover plate on the back side of the viewing screen. It will show the AT&T and Samsung logos. Look on the right side of the phone for the crease in between the black back cover and the front silver cover of the viewing screen.
    • Failure to utilize the specified tool may cause damage to the device.

    • Locate the black cover plate on the back side of the viewing screen. It will show the AT&T and Samsung logos.

    • Look on the right side of the phone for the crease in between the black back cover and the front silver cover of the viewing screen.

    • Pry the cover plate off using a plastic opening tool.

  6. Failure to utilize the specified tool may cause damage to the device. Identify the metal bracket that covers the internal body.
    • Failure to utilize the specified tool may cause damage to the device.

    • Identify the metal bracket that covers the internal body.

    • Identify the metal tabs surrounding the metal bracket mentioned in the previous step.

    • Remove the metal bracket using a small pick or a Phillips #00 screwdriver.

    • Close the phone.

  7. Find the camera on the upper part of the phone. It will be displayed as a small black circle.
    • Find the camera on the upper part of the phone. It will be displayed as a small black circle.

    • Follow the copper ribbon connected to the camera downward to the black connection port.

  8. Failure to utilize the specified tool in the proper way may cause damage to the device. Pry up the black connector using a pick. This should lock the black connector into an upward position, which will release the copper ribbon connected to the phone's camera.
    • Failure to utilize the specified tool in the proper way may cause damage to the device.

    • Pry up the black connector using a pick. This should lock the black connector into an upward position, which will release the copper ribbon connected to the phone's camera.

  9. Gently grasp the copper ribbon attached to the camera using a pair of tweezers. Gently pull copper ribbon towards the camera. This should pull the copper ribbon out completely.
    • Gently grasp the copper ribbon attached to the camera using a pair of tweezers.

    • Gently pull copper ribbon towards the camera. This should pull the copper ribbon out completely.

  10. Remove the camera.
    • Remove the camera.

结论

To reassemble your device, follow these instructions in reverse order.

Jonathon

于2014年10月15日注册

10 信誉积分

撰写一个指南

团队

Ohio State, Team 1-4, Mccook Fall 2014 Ohio State, Team 1-4, Mccook Fall 2014 的会员

OSU-MCCOOK-F14S1G4

3 名成员

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 213