跳转到主内容

简介

The disassembly of the covers will be needed to replace/repair anything on the Samsung SCV-VLUUST50, not including the battery.

  1. Unscrew all visible screws indicated by red circles with a #00 Phillips driver. Slide memory card cover and unscrew hidden screw  underneath with a #00 Phillips driver. Slide memory card cover and unscrew hidden screw  underneath with a #00 Phillips driver.
    • Unscrew all visible screws indicated by red circles with a #00 Phillips driver.

    • Slide memory card cover and unscrew hidden screw underneath with a #00 Phillips driver.

  2. Remove the flat side panel by applying gentle pressure toward the bottom of the camera. Remove the corner panel by applying pressure away from the shutter button. The memory card cover will come off with the corner panel.
    • Remove the flat side panel by applying gentle pressure toward the bottom of the camera.

    • Remove the corner panel by applying pressure away from the shutter button.

    • The memory card cover will come off with the corner panel.

    • Remove the top panel by applying gentle pressure away from the shutter button.

  3. Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.
    • Remove screws beneath the top panel indicated by red circles with a #00 Phillips driver.

  4. Remove the front and back covers by pulling them straight apart. Remove the front and back covers by pulling them straight apart.
    • Remove the front and back covers by pulling them straight apart.

结论

To reassemble your device, follow these instructions in reverse order.

Jade Withrow

于2018年02月08日注册

255 信誉积分

创作了2篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 71