Skip to main content

介绍

It may become necessary to replace the logic board on this cell phone in order to correct a problem. Following this guide will make removal quite easy.

  1. Slide the latch on the back of the phone up.
    • Slide the latch on the back of the phone up.

  2. Remove the battery.
    • Remove the battery.

  3. After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.
    • After removing the battery, remove the four small Phillips-head screws with a #0 Phillips screwdriver.

  4. Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物

    Android 维修工具包

    一个新的屏幕或电池就在一个套件之内。

    现在开始购物
  5. Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.
    • Using a thumbtack, pry the small plastic cover from the case near the base of the antenna.

  6. With a #0 Phillips screwdriver remove the screw which you just uncovered.
    • With a #0 Phillips screwdriver remove the screw which you just uncovered.

  7. Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open. Then disconnect the small power connector near the top of the phone.
    • Using the spudger, carefully pry the case apart starting near the charging port. Ease the case open.

    • Then disconnect the small power connector near the top of the phone.

  8. Gently pry up the ribbon-type connector with the spudger.
    • Gently pry up the ribbon-type connector with the spudger.

  9. Carefully pry the logic board from the case with the spudger.
    • Carefully pry the logic board from the case with the spudger.

终点

另外一个人完成了本指南。

Nathan Brink

于2010年04月11日注册

19 Reputation

创作了7篇指南

Team

Cal Poly, Team 34-59, Forte Spring 2010 Cal Poly, Team 34-59, Forte Spring 2010 的会员

CPSU-FORTE-S10S34G59

4 名成员

创作了14篇指南

One Comment

Perfect instructions to remove the back of the case. Thanks

John Berg - 回复

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 2,647