With the phone upright and folded shut, locate the two silver tabs at the top of the screen.
  • With the phone upright and folded shut, locate the two silver tabs at the top of the screen.

  • Using one hand, pinch the two tabs inward, and use your other hand to slide the front cover of the screen off of the phone.

  • Note: Do not apply too much of force. If you find it difficult to remove the front cover, try pinching the tabs in harder, and make sure you are sliding the front cover directly downward.

添加评论

Using the T6 Torx screwdriver, remove each of the 4mm screws located in the corners of the phone.
  • Using the T6 Torx screwdriver, remove each of the 4mm screws located in the corners of the phone.

  • Be sure to keep track of the little screws, since they can be lost easily.

添加评论

  • Locate the tabs on either side of the phone. Pull the outer case away from each tab with the plastic opening tool.

添加评论

  • Hold the phone upside-down.

  • Two plastic tabs are located under the lip of your phone. Use a plastic opening tool to pop the outer case away from the tabs.

  • After the outside case is clear of the four tabs, removed it.

添加评论

结论

To replace one of the screens, follow the corresponding guide from this point on. To reassemble your device, follow these instructions in reverse order.

Anthony Cisneros

于2012年01月20日注册

1 信誉积分

创作了2篇指南

团队

Cal Poly, Team 11-23, Maness Winter 2012 Cal Poly, Team 11-23, Maness Winter 2012 的会员

CPSU-MANESS-W12S11G23

4 名成员

创作了10篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 929