跳转到主内容

简介

Installing the front cover of the phone.

配件

没有特定配件。

  1. Use a Philips #0 screwdriver to remove the two screws below the screen.
    • Use a Philips #0 screwdriver to remove the two screws below the screen.

  2. Using the spudger, separate the black speaker cover from the top part of the phone. Gently remove the black speaker cover completely. Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.
    • Using the spudger, separate the black speaker cover from the top part of the phone.

    • Gently remove the black speaker cover completely.

    • Remove the two screws, approximately 10 mm in length, behind the black speaker cover with the screwdriver.

  3. Once the two screws are taken out, use the spudger to remove the front cover of the phone. Once the two screws are taken out, use the spudger to remove the front cover of the phone.
    • Once the two screws are taken out, use the spudger to remove the front cover of the phone.

结论

To reassemble your device, follow these instructions in reverse order.

Ashley

于2012年10月22日注册

19 信誉积分

创作了2篇指南

团队

Clemson, Team 14-6, Benson Fall 2012 Clemson, Team 14-6, Benson Fall 2012 的会员

CLEM-BENSON-F12S14G6

3 名成员

创作了12篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 0

总计 220