修复你的物品 社区 商店

Samsung Rogue Camera Replacement

简介

This guide will provide a step-by-step procedure for replacing the camera in your Samsung Rogue.

你所需要的

  1. Samsung Rogue Camera Replacement, Battery: 步骤 1 中的图像 1，2 Samsung Rogue Camera Replacement, Battery: 步骤 1 中的图像 2，2

    • Before disassembling your Samsung Rogue, make sure it is powered off.

    • With your thumbs, push down on the back cover of your phone and slide it away from the camera.

    编辑

  2. Samsung Rogue Camera Replacement: 步骤 2 中的图像 1，2 Samsung Rogue Camera Replacement: 步骤 2 中的图像 2，2

    • You can now remove the battery by prying it up with your finger.

    编辑

  3. Samsung Rogue Camera Replacement, Motherboard: 步骤 3 中的图像 1，1

    • Use a plastic opening tool to carefully pry the back cover surrounding the camera up from the phone.

    编辑

  4. Samsung Rogue Camera Replacement: 步骤 4 中的图像 1，1

    • Remove the five 3.4mm Philips screws securing the backing of the phone.

    编辑

  6. Samsung Rogue Camera Replacement: 步骤 5 中的图像 1，3 Samsung Rogue Camera Replacement: 步骤 5 中的图像 2，3 Samsung Rogue Camera Replacement: 步骤 5 中的图像 3，3

    • Use a plastic opening tool to carefully pry off the back cover.

    • Make sure you are prying along the edge and not between the two halves of the phone that slide away from each other.

    • Be careful to not drop the volume changing piece, for it can easily slip out.

    编辑

  7. Samsung Rogue Camera Replacement: 步骤 6 中的图像 1，1

    • Remove the two 3.45 mm Philips screws below the white sticker.

    编辑

  8. Samsung Rogue Camera Replacement: 步骤 7 中的图像 1，2 Samsung Rogue Camera Replacement: 步骤 7 中的图像 2，2

    • Carefully lift the motherboard up from the bottom edge.

    • The film of wires is still attached to the motherboard, so do not completely remove the motherboard just yet or you may damage it.

    编辑

  9. Samsung Rogue Camera Replacement: 步骤 8 中的图像 1，2 Samsung Rogue Camera Replacement: 步骤 8 中的图像 2，2

    • Use a plastic opening tool to disconnect the film from the motherboard.

    编辑

  10. Samsung Rogue Camera Replacement, Speaker/Antenna: 步骤 9 中的图像 1，1

    • On the underside of the motherboard, remove the single 3.3mm Philips screw.

    编辑

  11. Samsung Rogue Camera Replacement: 步骤 10 中的图像 1，3 Samsung Rogue Camera Replacement: 步骤 10 中的图像 2，3 Samsung Rogue Camera Replacement: 步骤 10 中的图像 3，3

    • The speaker and the antenna are both connected on the same black piece.

    • Use a plastic opening tool to pop off the edges of the speaker/antenna piece from the motherboard.

    • Turn over the motherboard and carefully lift the speaker/antenna piece straight up.

    • The camera is held in the middle of the speaker/antenna piece. Make sure to lift directly up when lifting the speaker/antenna piece, otherwise you can risk damaging the camera.

    编辑

  12. Samsung Rogue Camera Replacement, Camera: 步骤 11 中的图像 1，3 Samsung Rogue Camera Replacement, Camera: 步骤 11 中的图像 2，3 Samsung Rogue Camera Replacement, Camera: 步骤 11 中的图像 3，3

    • With two fingers carefully detach the camera from the motherboard by lifting straight up.

    • Do not pick it up by the camera itself. Handle the little black box it is attached to instead.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

作者

与5其他贡献者

Viktoria Mikoultchik

于04/15/12注册

25 声望

创作了7篇指南

徽章: 8

+ 5更多徽章

团队

Cal Poly, Team 7-32, Maness Spring 2012 Cal Poly, Team 7-32, Maness Spring 2012 的会员

CPSU-MANESS-S12S7G32

4 名成员

创作了16篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 1

过去 30 天： 1

总计 225