修复你的物品 社区 商店

Samsung RF28R7201SG Refrigerator Door Sensors Replacement

简介

This guide shows how to remove and replace the door sensors in your Samsung RF28R7201SG refrigerator.

The Samsung fridge uses a magnetic reed switch for each French door. If these sensors fail, the refrigerator will think a door is always open or closed.

你所需要的

  1. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Unplug your refrigerator: 步骤 1 中的图像 1，1

    • Unplug your refrigerator before you begin your repair.

    编辑

  2. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the hinge cover: 步骤 2 中的图像 1，1

    • Use a Phillips screwdriver to remove the three 18.5 mm-long screws securing the hinge cover on the top of the refrigerator.

    编辑

  3. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 3 中的图像 1，1

    • Lift the edges of the hinge cover to loosen it from the refrigerator.

    • Don't try to fully remove the cover, as it's still attached to the refrigerator by a few cables.

    • Flip the hinge cover over to access the cables underneath.

    编辑

  5. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 4 中的图像 1，2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 4 中的图像 2，2

    • Use your fingers to squeeze and disconnect the blue wire connector.

    • Use your fingers to squeeze and disconnect the white wire connector.

    编辑

  6. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 5 中的图像 1，1

    • Remove the hinge cover.

    编辑

  7. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Sensor information: 步骤 6 中的图像 1，2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Sensor information: 步骤 6 中的图像 2，2

    • The hinge cover has two door sensors:

    • The left door sensor

    • The left door sensor connector

    • The right door sensor

    • The right door sensor connector

    • Depending on your situation, you may need to replace either or both sensors.

    编辑

  8. Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the sensor: 步骤 7 中的图像 1，2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement, Remove the sensor: 步骤 7 中的图像 2，2

    • Use your fingers to squeeze and disconnect the sensor cable connector.

    编辑

  9. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 8 中的图像 1，2 Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 8 中的图像 2，2

    • Use a spudger or a flathead screwdriver to pry the sensor out of its retaining clips.

    编辑

  10. Samsung RF28R7201SG Refrigerator Door Sensors Replacement: 步骤 9 中的图像 1，1

    • Remove the door sensor.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

Take your e-waste to an R2 or e-Stewards certified recycler.

Repair didn’t go as planned? Ask our Answers community for help.

作者

与2其他贡献者

nicO

于04/14/15注册

15,927 声望

创作了88篇指南

徽章: 36

+ 33更多徽章

团队

Global Fixers Global Fixers 的会员

Community

33 名成员

创作了572篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 4

过去 30 天： 18

总计 160