跳转到主内容

简介

This guide will demonstrate careful steps to remove the motherboard from the phone without damaging the the interconnection parts.

  1. Press down the back and push up to remove back cover.
    • Press down the back and push up to remove back cover.

    • Insert finger into gap at the top left and remove battery.

  2. Use flat-head screwdriver to remove back lid.
    • Use flat-head screwdriver to remove back lid.

  3. Locate the six screws and remove them with Phillips #00 Screwdriver.
    • Locate the six screws and remove them with Phillips #00 Screwdriver.

  4. Macbook 电池维修套装

    起价 $69.99

    Buy Now

    Macbook 电池维修套装

    起价 $69.99

    Buy Now
    • Insert the flat-head screwdriver into the crevice.

    • Slide and dislodge snap-ons under.

    • Remove the back frame.

  5. Locate and remove the six screws with Phillips #00 Screwdriver.
    • Locate and remove the six screws with Phillips #00 Screwdriver.

    • Separate the black middle frame from the front frame.

    • Be careful not to tear the phone bus.

  6. Locate and remove the four screws with Phillips #00 Screwdriver.
    • Locate and remove the four screws with Phillips #00 Screwdriver.

    • Insert the flat-head screwdriver into the crevice.

    • Slide the flat-head screwdriver and dislodge the snap-ons under.

    • Be careful not to rip the band.

  7. Use hands to remove both phone buses from the linkages, and remove motherboard.
    • Use hands to remove both phone buses from the linkages, and remove motherboard.

结论

To reassemble your device, follow these instructions in reverse order.

Minh

于2011年04月28日注册

201 信誉积分

撰写一个指南

团队

CSU Los Angeles, Team 1-3, Nelson Spring 2011 CSU Los Angeles, Team 1-3, Nelson Spring 2011 的会员

CSULA-NELSON-S11S1G3

4 名成员

创作了4篇指南

添加评论

浏览统计数据:

过去的24小时: 0

过去的7天: 0

过去的30天: 1

总计 1,533