Samsung Powerbot R9250 Wheel Replacement

你所需要的

步骤 1 Wheel

Samsung Powerbot R9250 Wheel Replacement, Wheel: 步骤 1 中的图像 1，1

Flip the bot onto its side with the wheel you want to remove on top.

编辑

步骤 2

Remove the round white cap on the outside of the wheel.

编辑

步骤 3

Next, pry and remove the white casing that runs around the back round part of the bot.

编辑

步骤 4

Continue until the whole white casing comes off.

编辑

步骤 5

For the wheel you want to remove, there is a small square opening on outer black protective layer still around the wheel. Locate the screw that is inside the whole. Remove this screw.

编辑

步骤 6

Pry the black protective layer away from the wheel, and pull the wheel out.

编辑

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与2其他贡献者

团队

Cal Poly, Team 10-3, Banghart Winter 2017 Cal Poly, Team 10-3, Banghart Winter 2017 的会员

CPSU-BANGHART-W17S10G3

3 名成员

创作了10篇指南

一条评论

Hi Ethen. I've recently replaced both wheel kits on the same model powerbot you are working on in this guide. When I turn it on now it becomes absolutely possessed. Goes much faster than normal and moved erratically. I am wondering if you have ever experienced this or have heard of this.

Cameron Curran - 2017年8月18日回复

Samsung Powerbot R9250 Wheel Replacement

你所需要的

步骤 1 Wheel

添加评论

步骤 2

添加评论

步骤 3

添加评论

步骤 4

添加评论

步骤 5

添加评论

步骤 6

添加评论

作者

Ethen Sanchez

团队

Cal Poly, Team 10-3, Banghart Winter 2017 Cal Poly, Team 10-3, Banghart Winter 2017 的会员

一条评论

添加评论

嵌入本指南

预览