修复你的物品 社区 商店

Samsung NX2000 Motherboard Replacement

简介

This guide will require an extensive amount of tools, from screwdrivers to scalpels. The camera will be taken apart piece by piece extensively so make sure there is enough room to lay out all the parts without them becoming lost.

你所需要的

  1. Samsung NX2000 Motherboard Replacement, Motherboard: 步骤 1 中的图像 1，3 Samsung NX2000 Motherboard Replacement, Motherboard: 步骤 1 中的图像 2，3 Samsung NX2000 Motherboard Replacement, Motherboard: 步骤 1 中的图像 3，3

    • Remove the 4mm Y0 screws found on the sides and bottom of the camera.

    编辑

  2. Samsung NX2000 Motherboard Replacement: 步骤 2 中的图像 1，3 Samsung NX2000 Motherboard Replacement: 步骤 2 中的图像 2，3 Samsung NX2000 Motherboard Replacement: 步骤 2 中的图像 3，3

    • Use a plastic opening tool to pry the back cover (with LCD screen) away from the front of the camera.

    • Use a plastic opening tool to disconnect the LCD ribbon cable holding the two pieces of the camera together.

    编辑

  4. Samsung NX2000 Motherboard Replacement: 步骤 3 中的图像 1，1

    • Move towards the main frame of the camera and locate the three 1mm Y0 screws holding down the motherboard.

    编辑

  5. Samsung NX2000 Motherboard Replacement: 步骤 4 中的图像 1，2 Samsung NX2000 Motherboard Replacement: 步骤 4 中的图像 2，2

    • Lift the duct tape covering the ribbon cable connectors.

    • Use a plastic opening tool to lift the black tab on top of the ZIF connectors.

    • Pull all five ribbon cables out with tweezers.

    编辑

  6. Samsung NX2000 Motherboard Replacement: 步骤 5 中的图像 1，3 Samsung NX2000 Motherboard Replacement: 步骤 5 中的图像 2，3 Samsung NX2000 Motherboard Replacement: 步骤 5 中的图像 3，3

    • Take the time to make sure everything is detached and lift the motherboard slowly using your fingers.

    编辑
结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

作者

与4其他贡献者

Delmis Gomez

于02/09/16注册

125 声望

撰写一个指南

徽章: 5

+ 2更多徽章

团队

USF Tampa, Team 7-4, Cheng Spring 2016 USF Tampa, Team 7-4, Cheng Spring 2016 的会员

USFT-CHENG-S16S7G4

4 名成员

创作了10篇指南

4条评论

The step for removing the metal hot shoe lit and removing 2 small screws is missing.

This is also required in order to be able to remove the back cover.

Rinaldo Eversdijk - 回复

The step removing the metal hot shoe lit and removing 2 small screws underneath is missing.

This is required in order to be able to remove the back cover.

Rinaldo Eversdijk - 回复

The camera is simply dead from one day to the next it stopped working, what could it be?

my_legacy_lethal_infected - 回复

Aqui a mesma coisa, do nada, quando liga a câmera o LED Verde fica parado e em seguida pisca alternadamente, ESTÁ NOVISSIMA, nunca sofreu quedas ou qualquer outro tipo de avaria

Gabriel Fernandes Guimaraes -

添加评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 3

过去 30 天： 13

总计 1,386