跳转到主内容

Samsung NX2000 LCD Replacement

你所需要的

  1. Samsung NX2000 LCD Replacement, LCD: 步骤 1 中的图像 1,1
    • First begin by flipping your camera upside down.

    • Remove the seven 4mm screws from indicated circles shown using a Y0 screwdriver. There are three on the bottom, and two on each side

    • Remember to store the screws in a secure place.

  2. Samsung NX2000 LCD Replacement: 步骤 2 中的图像 1,3 Samsung NX2000 LCD Replacement: 步骤 2 中的图像 2,3 Samsung NX2000 LCD Replacement: 步骤 2 中的图像 3,3
    • Insert a plastic opening tool into the gab between the camera body and the back panel. Carefully pry open the camera and separate the back panel.

    • When working with electronics, it's important to choose a tool that's ESD-safe to avoid accidental damage to the device. The metal spudger is great when you need serious prying power, but the regular black nylon spudger or a plastic opening tool should be used whenever possible.

  3. Samsung NX2000 LCD Replacement: 步骤 3 中的图像 1,3 Samsung NX2000 LCD Replacement: 步骤 3 中的图像 2,3 Samsung NX2000 LCD Replacement: 步骤 3 中的图像 3,3
    • Before taking it apart you'll have to detach the display ribbon cable.

    • Use a plastic opening tool, lift up the black strip to release the ribbon cable from the connector.

  4. Samsung NX2000 LCD Replacement: 步骤 4 中的图像 1,3 Samsung NX2000 LCD Replacement: 步骤 4 中的图像 2,3 Samsung NX2000 LCD Replacement: 步骤 4 中的图像 3,3
    • Separate the LCD half compartment of the camera from the main body.

  5. Samsung NX2000 LCD Replacement: 步骤 5 中的图像 1,1
    • Remove the four 1mm screws with the Y0 screwdriver.

  6. Samsung NX2000 LCD Replacement: 步骤 6 中的图像 1,3 Samsung NX2000 LCD Replacement: 步骤 6 中的图像 2,3 Samsung NX2000 LCD Replacement: 步骤 6 中的图像 3,3
    • Use a plastic opening tool or tweezers to lift the green tape located on top of the LCD controller board.

    • Detach the two ribbon cables, by first lifting the black tab on top of the connector.

    • Pull the ribbon cables out of the connectors with tweezers or two fingers.

  7. Samsung NX2000 LCD Replacement: 步骤 7 中的图像 1,3 Samsung NX2000 LCD Replacement: 步骤 7 中的图像 2,3 Samsung NX2000 LCD Replacement: 步骤 7 中的图像 3,3
    • Place blue plastic spudger in between LCD screen and plastic surrounding.

    • Begin to lift up slowly, removing the LCD screen from the main frame.

  8. Samsung NX2000 LCD Replacement: 步骤 8 中的图像 1,1
    • The LCD screen is now separated form the main frame.

结论

To reassemble your device, follow these instructions in reverse order.

2等其他人完成本指南。

Maria Zamora

于02/09/16注册

155 声望

撰写一个指南

团队

USF Tampa, Team 7-4, Cheng Spring 2016 USF Tampa, Team 7-4, Cheng Spring 2016 的会员

USFT-CHENG-S16S7G4

4 名成员

创作了10篇指南

0条评论

添加评论

浏览统计数据:

过去 24 小时: 0

过去 7 天: 1

过去 30 天: 5

总计 827