Samsung NX1000 Back Panel Replacement - iFixit 维修指南

本指南有最近更改，您可查看未经巡查的最新版本。

简介

This guide will show you how to separate the back panel from the camera. Before starting the guide make sure the camera is powered off and the memory card is removed.

你所需要的

步骤 1 Removing the Back Panel

Samsung NX1000 Back Panel Replacement, Removing the Back Panel: 步骤 1 中的图像 1，1

Locate the bottom panel of the camera.
Unscrew the four 4.5mm Philips #000 (perpendicular cross) screws with the Philips #000 screwdriver.
Push the screwdriver firmly into the screw so that the driver will not strip the screw.

步骤 2

Samsung NX1000 Back Panel Replacement: 步骤 2 中的图像 1，2

Samsung NX1000 Back Panel Replacement: 步骤 2 中的图像 2，2

Unscrew the three 4.5mm #000 Philips screws on the sides of the camera using the Philips #000 screwdriver.

步骤 3

Samsung NX1000 Back Panel Replacement: 步骤 3 中的图像 1，2

Samsung NX1000 Back Panel Replacement: 步骤 3 中的图像 2，2

Pry open the back panel using the metal spudger.
Do not completely separate the back panel from the camera. There is a ribbon on bottom left back corner underneath the buttons. The ribbon will hold the back panel to the camera. Do not jam the tool in this part or the ribbon will rip.

步骤 4

Samsung NX1000 Back Panel Replacement: 步骤 4 中的图像 1，2

Samsung NX1000 Back Panel Replacement: 步骤 4 中的图像 2，2

Open the two halves of the camera, taking care not to disturb the ribbon cable.
Do not completely separate the halves. The ribbon cable needs to be disconnected from the ZIF connection carefully as shown in the next step

步骤 5

Samsung NX1000 Back Panel Replacement: 步骤 5 中的图像 1，3

Samsung NX1000 Back Panel Replacement: 步骤 5 中的图像 2，3

Samsung NX1000 Back Panel Replacement: 步骤 5 中的图像 3，3

Remove the ribbon by lifting the grey tab on the ZIF connector with the metal spudger.
Push the ribbon out of its socket with the plastic opening tool.

步骤 6

Samsung NX1000 Back Panel Replacement: 步骤 6 中的图像 1，2

Samsung NX1000 Back Panel Replacement: 步骤 6 中的图像 2，2

Completely separate the back panel from the camera.

结论

To reassemble your device, follow these instructions in reverse order.

另外一个人完成了本指南。

作者

与6其他贡献者

Yesenia

于01/22/15注册

717 声望

创作了6篇指南

+ 7更多徽章

团队

Cal Poly, Team 20-13, Maness Winter 2015 Cal Poly, Team 20-13, Maness Winter 2015 的会员

CPSU-MANESS-W15S20G13

4 名成员

创作了14篇指南

0条评论

浏览统计数据:

过去 24 小时： 0

过去 7 天： 0

过去 30 天： 0

总计 103